What did you do to your Hellcat today?

[coolblue]

MADE A SET OF CUSTOM DOOR SILL EMBLEMS.
Used a set of N.O.S. 2005/2006 Jeep SRT door sill plates as donors. Liked the SRT stamping in the old Jeep sill plates and they still match the SRT logo on the Hellcat grill badge perfectly. The new Hellcat accessory sill plates look fine at first glance but the logo is a sticker not a stamping, etching,or cast into part. No good for me. These were bent in shipping and too short to fill the Challenger sill any way, so the logo is all I needed/wanted. They're still O.E.M. Mopar, stamped, and stainless so they fill the bill for me and add a bit of uniqueness to the car Imho.

 

[Old Mopar Guy]

Nicely done!

 

[coolblue]

Nicely done!

Thanks very much.

 

[Beast707]

Today added the Performance Spoiler and updated Fastman TB.

 

[Beast707]

G2s are excellent choice up front

Only have about 25miles on them biggest difference I've noticed and maybe because they're new is when turning at slower speeds the wheel doesn't turn as easy it's like they are gripping into the pavement. They match nicely with the r2's. Got them for free so went for it. That's quite a story lol

 

[Beast707]

Been thinking on doing the same thing. Running the stockers on the front

So far so good after 25 miles or so. Not to mention DT gave them to me for free in 305's. Pretty sure the cost was like 267 or close to that. Having the Pirelli's up front was killing MY OCD. Lol

 

[ACMAVRO]

Only have about 25miles on them biggest difference I've noticed and maybe because they're new is when turning at slower speeds the wheel doesn't turn as easy it's like they are gripping into the pavement. They match nicely with the r2's. Got them for free so went for it. That's quite a story lol

I think they look sharp and they are grippy.

 

[fumanchu182]

Today Victoria got the Z26 treatment on all four corners. Tried to clean up the calipers from all the brake dust and gunk as well. God bless Simple Green. Easiest pad change ever.

 

[DGatzby]

Dropped it off to the surgeon again this morning. The P2098 code was an unmistakable exhaust leak. Had to park it last week. I was out all weekend. When I put it up to change the tires/wheels it is clear it came apart at the header/exhaust connection rt side. Damn blew out the gasket, had to tighten it up a bit. Can’t believe we could not hear that noise before. Someone did not put it back on well when they had it off doing my suspension in May. So they can fix that and rip those POS noisy as hell BMR toe links off. I was going to do the AAD replacement install myself, but screw it. He can put them on and I gave him special toe alignment numbers for the front and back. One stop shop. So it can be 100% ready to do anything I want now. First thing I am going to mount the big rear Cup 2’s up and run the living shit out of it. It better hook and be real smooth, because that rear should be dialed in real fine now.

 

[vortecd]

Today Victoria got the Z26 treatment on all four corners. Tried to clean up the calipers from all the brake dust and gunk as well. God bless Simple Green. Easiest pad change ever.

View attachment 20990
View attachment 20991
View attachment 20992
View attachment 20993

It is a must. Did my Daytona 2 weeks after getting it and about the same after getting the Hellcat.

 

[BULL]

Help me, I'm feeling all woozy and unable to stand up by myself...



I think I might,,, yup, I might...

 

[72 440 Barracuda]

I decided to step up and start going fast - tires and wheels are coming, which mean a driveshaft and diff brace with a tazer for the line loc (M6)... I am seeing a slippery slope ahead (and money leaving my wallet)...
Speed cost money - how fast do I want to go?

Ok - wheel and tire package coming, Tazer ordered, driveshaft ordered, and diff brace ordered - now the question is; with some traction coming how fast is she? 11.68 at 123mph best with constant traction issues on stock tires. I hope to get close 11.00 with good air after these changes.
Starting down that slippery slope - Just tired of the skat packs nipping at my heals... lol.

 

[fumanchu182]

Help me, I'm feeling all woozy and unable to stand up by myself...
I think I might,,, yup, I might...

 

[fumanchu182]

I'm on a roll this week, removed some scratches from previous owner that were causing an eye twitch every time I noticed them.








I wonder what adventures I'll get into tomorrow. This is the product I used:


The video that inspired it:

 

[Hickster]

Watched the air leak out of the tire. Like watching paint dry. See how this new trunk laid tire pump works in the morning. Never essn it do it's trick, but to get it to the dealer will what it takes. Have a warranty on tires and wheels. Ya

 

[ACMAVRO]

Ordered a Barton shifter with black knob and stick both with red engraving to match the black and red interior.

 

[Hickster]

Looks like 1 of my last dates. Even the ears.

 

[fumanchu182]

Looks like 1 of my last dates. Even the ears.

 

[Hickster]

After lukin a round the bore dums and lax of top icks tonight,,, I and the cat descided to fix the spe hell check. No fixin this critter, so we too our talents to the kitche,,, now a messy sticky bar. We have devented a drink su bodies has de stroyed in ta Islands sumz where z. Butts actually taste damn good. Could be the food from Outs Back I never eat atz. Butze if this dosenen' send me to the out house next door, people stealing tissue paper. I will place this res a pee on the forum. Great ingre--- just stuff, fresh fruits and hard core shine and cream. Hold on, on, wait till If need be puke in the Cobra next door. Cat says we are good. So, I Z let you dudes and ettes know. Bester start wright it er down. 1/2 way thru and the 65" TV is getting bigger. So a pillester for the up and coming heaer ache and the last 1/2 glass we will determine the eff- affects. Snore a nore ya.

 

[72 440 Barracuda]

Ordered a Barton shifter with black knob and stick both with red engraving to match the black and red interior.
View attachment 21047

Did you remove the clutch delay valve? (Or going to remove) - I did that when I added the shifter and it worked very well (very happy with it!).
But make sure you tighten the shifter - mine came loose because I didnt tighten the fasteners for the positioning... (lol) No harm done though.